sim.floatingViewAdd

Adds a floating view to current page

Synopsis

int floatingViewHandle = sim.floatingViewAdd(float posX, float posY, float sizeX, float sizeY, 
                                             int options)

int floatingViewHandle = sim.floatingViewAdd(float posX, float posY, float sizeX, float sizeY, 
                                             int options)

Arguments

posX & posY: relative position of the center of the floating view. Accepted values are between 0.0 and 1.0
sizeX & sizeY: relative size of the floating view. Accepted values are between 0.0 and 1.0
options: bit-coded:
- bit0 set (1): double click allows swapping the floating view with the main view
- bit1 set (2): the floating view doesn't have a close button
- bit2 set (4): the floating view cannot be shifted
- bit3 set (8): the floating view cannot be resized

Return values

floatingViewHandle: handle of the floating view